Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 558

15 Problem Solving
Error Code
033-556 [Cause]
[Remedy] If necessary, check whether the correct machine password has been instructed to the
033-557 [Cause]
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
033-558
[Cause]
[Remedy] Ask the sender to set a remote ID. If necessary, set the machine to receive even when a
033-559 [Cause]
[Remedy] An error occurred during operation of the maintenance system by Fuji Xerox. When the
033-560
[Cause]
033-561
[Remedy] This is an error occurring during remote maintenance work by Fuji Xerox. No measure is
033-562
033-563 [Cause]
[Remedy] Take one of the following measures:
033-564 [Cause]
[Remedy] Wait for a while, confirm the fax service settings and the fax number, and then send
033-565 [Cause]
[Remedy] Wait until the number of jobs awaiting transmission decreases, or reduce the number of
033-566
[Cause]
[Remedy] Correctly specify the recipient's fax number.
033-567 [Cause]
[Remedy] Correctly enter the recipient's fax number, and execute the operation again.
033-568 [Cause]
[Remedy] Execute the operation again. If receiving, ask the sender to send again. If the error still
033-569 [Cause]
15
[Remedy] Load paper in Tray 5 according to the direction displayed on the screen.
033-570 [Cause]
[Remedy] Wait for a while, confirm the Fax service settings and the fax number, and then send
033-571 [Cause]
[Remedy] Cancel the fax data in the queue, or wait for a while, and execute the operation again.
033-572 [Cause]
[Remedy] No measure is required. The data will be printed after a while.
558
Cause and Remedy
The password sent to the other machine did not match the password for receiving faxes
on the other machine.
other machine.
The number of services or of recipients exceeds the maximum limit.
recipients, and then send again.
The machine is set to reject faxes without a remote ID, and a remote ID was not sent
from the other machine.
remote ID is not sent.
The authentication ID is incorrect.
communication line is available, contact our Customer Support Center.
An error occurred during remote maintenance work.
required.
Paper that can print faxed documents is not loaded in a tray.

Specify the paper size.

Confirm whether the paper tray is set correctly.
The machine was turned off during communication.
again if sending. If the error still is not resolved, contact our Customer Support Center.
Cannot send because too many recipients are specified.
recipients, and then send again.
Cannot send because the recipient (fax number) is not specified.
The recipient (fax number) is incorrect.
An error occurred during fax transmission.
is not resolved, contact our Customer Support Center.
Paper in the tray is not loaded in the direction that the received fax data can be printed.
The machine was turned off during communication.
again if sending. If the error still is not resolved, contact our Customer Support Center.
Cannot use the Fax service because of causes such as memory is insufficient.
The data received is not printed.