Pdf Direct Print - Fuji Xerox apeosport-iv C5570 Administrator's Manual

15 Appendix

PDF Direct Print

PDF Direct Print is a feature that prints PDF files by directly using the lpr command
instead of a print driver. When this feature is used, the following items will be printed
based on the settings of [PDF] under [Print Mode].
Note
PDF Direct Print Settings
This section describes the available settings with the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
"ContentsBridge" provided by Fuji Xerox.
Note
Setting Item
Output quantity
2 sided printing
Print mode
15
Collate
594
Output Quantity
2 Sided Printing
Print Mode
Collate
• Two types of the PDF Direct Printing methods are available: the genuine Adobe PDF Direct
Print and the non-PostScript PDF Direct Print (PDF Bridge). You can select which method to
prioritize in the System Administration mode.
• When you use the lpr command to print, specify the number of copies to be printed in the lpr
command. The copy quantity setting made on [Output Quantity] under [PDF] becomes
invalid. If the copy quantity is not specified in the lpr command, only one copy is printed.
• Before you print PDF file using the lpr command, the LPD protocol of the machine must be
started with the control panel or CentreWare Internet Services.
• PDF Direct Print supports PDF version 1.6.
• For information on printing PDF files using ContentsBridge Utility, refer to the manual
provided on the Driver CD Kit.
Item
Number
401 Sets the number of copies to be printed.
[1-999] (Default: 1): 1-999 sheets
402 Sets the 2 sided printing option.
[0] (Default)
[1]
[2]
[2 Sided Print] prints 2 sided in the orientation so that pages can be
bound along the long edge.
[2 Sided Print, Flip on Short Edge] prints 2 sided in the orientation so that
pages can be bound along the short edge.
403 Selects which you prioritize: image quality or print speed.
[0] (Default)
[1]
[2]
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
404 Selects whether to print multiple-sheet documents as collated sets (1, 2,
3...1, 2, 3...).
[0] (Default)
[1]
Layout
Paper Size
Output Color
Print Processing Mode
Value
: 1 Sided
: 2 Sided, Flip on Long Edge
: 2 Sided, Flip on Short Edge
: Standard
: High Speed
: Fine
: Off
: On