T.38 Settings - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

5 Tools
 Secondary Server - Login User Name
Enter the login user name of the secondary server. Up to 31 characters are allowed.
 Secondary Server - Login Password
Enter the login password of the secondary server. Up to 31 characters are allowed.
 Secondary Server Type
Select the type of secondary server from [Standard] or [Cisco].
VoIP Gateway Setup
You can configure the following settings for VoIP Gateway 1 to 50.
You can also configure different VoIP gateways by a recipient's telephone number.
Note
 ID
Specify a number to identify the recipients' telephone numbers.
If you specify "03", this VoIP gateway is used for the telephone numbers beginning with "03"
such as "0312345678" and "0312345679".
Note
5
 Gateway Address
Enter the IP address of the VoIP gateway.

T.38 Settings

Configure the settings for T.38.
T.38 Transport Protocol
Select T.38 transport protocol from [TCP] or [UDP].
Note
UDPTL Listening Port Number
Set the UDPTL listening port number from 1 to 65535.
Important • Do not use any numbers assigned to other ports.
TCP Listening Port Number
Set the TCP listening port number from 1 to 65535.
Important • Do not use any numbers assigned to other ports.
RTP Listening Port Number
Set the RTP listening port number from 1 to 65535.
Important • Do not use any numbers assigned to other ports.
Prioritize IP Packets / Prioritize IP Packets (Ethernet 1), Prioritize IP Packets (Ethernet 2)
Set the priority of IP packet transmission from 0 to 255.
Note
216
• To use a fixed VoIP gateway, do not register the ID, and specify only the IP address for VoIP
Gateway 1.
• You cannot use a VoIP gateway in an IPv6 network.
• If you specify a specific telephone number, specify the entire telephone number such as
"0312345678".
• When you use VoIP gateway manufactured by Cisco Systems, Inc., select [UDP].
• The value set varies depending on your environment. Consult your network administrator.