Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 534

15 Problem Solving
Error Code
021-538 [Cause]
[Remedy] Check with your system administrators. If the system administrators have not reserved
021-539
[Cause]
[Remedy] Check with your system administrators. If the system administrators have not reserved
021-540
[Cause]
[Remedy] If necessary, execute the operation again.
021-541 [Cause]
[Remedy] Contact our Customer Support Center.
021-542
[Cause]
021-543
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-545 [Cause]
[Remedy] Confirm the contract period of the EP system. When the error is displayed during the
021-565
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-566
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-567 [Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
021-568 [Cause]
[Remedy] Get the time of this machine's watch correct. If the error still is not resolved, switch off
021-569 [Cause]
[Remedy] Make sure that the USB cable of 3Gnet-BOX is connected. If not, connect it correctly. If
15
021-570
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
534
Cause and Remedy
The software upgrade was canceled since the machine was in use at the reserved time.
the update, contact our Customer Support Center.
The software upgrade was canceled since the machine power was off at the reserved
time.
the update, contact our Customer Support Center.
The SW upgrade was canceled since the machine power was turned off while
downloading the update file.
The SW upgrade cannot be started since an incorrect setting is done to the machine.
An error occurred in the machine.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred while connecting to the EP system via the Internet.
contract period, contact our Customer Support Center.
The 3G connection of 3Gnet-BOX is time out.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
The 3G connection of 3Gnet-BOX is time out.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred in the SIM card inserted in 3Gnet-BOX..
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Failure of time synchronization.
the machine power, make sure that the touch screen is blank, and then switch on the
machine power. If the error still is not resolved, contact our Customer Support Center.
Failure of the USB connection to 3Gnet-BOX.
the error still is not resolved, switch off the machine power, make sure that the touch
screen is blank, and then switch on the machine power. If the error still is not resolved,
contact our Customer Support Center.
An error occurred in the 3G connection of 3Gnet-BOX and connection is not started.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.