Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 661

Product Name
Embedded IC Card Reader for
Wing Table
*
Image Log Kit
Image Log Kit (Adobe
*
PostScript 3)
*
External Access Kit
Network Accounting Kit
USB Hub
Wireless LAN Converter
Server-less On-Demand Print
Kit
Assist Handle
Attention Light II
Anti Earthquake Kit
Power Cord 2
*
Voice Guidance 2
Manual Holder
* : ApeosPort series models only
Note • The optional components are subject to change without notice.
• You cannot install the Adobe PostScript 3 Kit and the Emulation Kit simultaneously.
• For the latest information, contact our Customer Support Center.
Description
A built-in IC Card Reader for Wing Table, which can read data
in a smart card.
Note • Optional Wing Table and USB Hub are required to install the
IC Card Reader.
For details on this option, refer to "Configuration for IC Card Reader (Optional)"
(P.429)
Allows you to attach job logs, which include information on a user,
time, and the number of sets output, to the copies/prints that
have been output on the machine.
Allows you to attach job logs, which include information on a user,
time, and the number of sets output, to the copies/prints that
have been output on the machine.
Allows you to link to a remote application through the control
panel.
Allows you to keep track of user accounts via an external
authentication server.
Adds a USB port to equip the Memory Card Reader to the
machine.
A wireless LAN bridge that converts a 10/100/1000BASE-T wired-
LAN machine to a wireless-LAN machine.
Note • 1000BASE-T is not supported for some models. Gigabit
Ethernet (optional) or Secondary Ethernet Kit(optional) is
required.
A print job sent from a computer will be temporarily stored in the
machine. Even if the machine is busy, you can call and execute the
job on another machine on the network. No server is required to
store the jobs.
Allows you to close the document cover more easily.
Allows you to know the machine trouble or the completion of copy
or incoming fax jobs, even when the machine is distant from you.
Prevents the machine from being moved by an earthquake.
A power cord for the machine and the Finisher D2-P with Booklet
Maker or HCF B1-S.
Allows you to operate the machine using the numeric keypad,
following the the voice guidance.
A holder to put user documentation in
Optional Components
16
661