Security Settings - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

5 Tools

Security Settings

Set the security settings.
SSL/TLS Settings
Configure the SSL/TLS settings to encrypt the communication between the server or the
client computer and the machine. Enabling SSL/TLS protects the communication from an
unauthorized access and prevents information leakage or data falsification.
 Device Certificate - Server
Select a certificate for HTTP SSL/TLS communications.
 HTTP - SSL/TLS Communication
Select whether or not to enable HTTP SSL/TLS communications.
 HTTP - SSL/TLS Port Number
Set the port number used for HTTP SSL/TLS communication from 1 to 65535.
The default value is 443.
Important • Do not use the numbers assigned to the other ports.
5
 LDAP - SSL/TLS Communication
Set whether or not to enable the SSL/TLS communications for authentication and searches.
If you enable the LDAP SSL/TLS communications, you must set [Primary Server - Port
Number] and [Secondary Server - Port Number] under [LDAP Server/Directory Service
Settings].
The port number for SSL/TLS communications of the LDAP directory server is normally set
to 636.
 SMTP-SSL/TLS Communication
Configure the SSL/TLS communications.
 Disabled
The machine does not communicate in SSL/TLS.
 STARTTLS (If Available)
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails,
the machine does not communicate in SSL/TLS.
 STARTTLS
The machine verifies the certificate and communicates in SSL/TLS. If the verification fails,
the machine cannot perform communication.
SSL/TLS

The machine communicates in SSL/TLS.
Note
 ThinPrint-SSL/TLS Communication (ApeosPort Series Models Only)
Select whether or not to enable the SSL/TLS communications.
224
• For IPv4, enter the address in the format "xxx.xxx.xxx.xxx", where "xxx" is a numeric value from 0 to
255.
• The Internet Fax Direct (P2P) feature does not support SMTP-SSL/TLS communication.