15 Problem Solving
2
Move the levers 4b and turn the knob 3a to the
right. Remove the jammed paper.
Note
3
Return the lever 4b to the original position.
4
Close the finisher right cover.
Note
Paper Jams at the Lever 2a and the Knob 3a when D2 Folder Unit is Installed
1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Move the lever 2a and turn the knob 3a to the
left. Remove the jammed paper.
Note
15
618
• If paper is torn, check for any torn pieces of
paper inside the machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
• If paper is torn, check for any torn pieces of
paper inside the machine.