Configuration Of Scan To My Folder (Apeosport Series Models Only); Step 1 Preparations; Step 2 Enabling Smb Port And Setting Up Tcp/Ip - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

9 Scanner Environment Settings

Configuration of Scan to My Folder (ApeosPort Series Models Only)

This section describes how to configure the machine to use the Scan to My Folder service.

Step 1 Preparations..................................................................................................................................................................... 358

Step 2 Enabling SMB Port and Setting up TCP/IP ............................................................................................................... 358

Step 3 Configuring Remote Authentication.......................................................................................................................... 359
Step 4 Configuring Scan to My Folder.................................................................................................................................... 360
Step 5 Configuration on the Computer.................................................................................................................................. 362
Step 1 Preparations
The Scan to My Folder service allows you to forward scanned files to recipients which vary
depending on a login user when [Login to Remote Accounts] is selected for [Login Type].
The following items are required to use the Scan to My Folder feature.
 Remote Authentication System
To use the Scan to My Folder service, a remote authentication system is required.
For more information about a remote authentication system, refer to "Authentication System" (P.218).
 Destination Computer
The following operation system must be installed on a destination computer.
For Mac OS X, a sharing user account is required on the Mac OS X.
 Microsoft Windows Server 2003
 Microsoft Windows Server 2008
 Microsoft Windows Server 2008 R2
 Microsoft Windows Server 2012
9
 Microsoft Windows Server 2012 R2
 Microsoft Windows Vista
 Microsoft Windows 7
 Microsoft Windows 8
 Microsoft Windows 8.1
Mac OS X 10.5 Leopard

 Mac OS X 10.6 Snow Leopard
 Mac OS X 10.7 Lion
 OS X 10.8 Mountain Lion
 OS X 10.9 Mavericks
Note
Step 2 Enabling SMB Port and Setting up TCP/IP
To use Scan to My Folder service, enable the SMB port and set the IP address. The following
describes the configuration procedures on the machine.
358
• If you use Mac OS X 10.7 Lion, contact our Customer Support Center and ask if your operating
system is supported.