Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 764

16 Appendix


Note
 IP Address Settings
The machine does not support a global IP address. Be sure to use the machine in an
environment using IP masquerade.


 Settings from the Control Panel
Before you use the E-mail service, set the maximum data size for sending e-mail on the
control panel. For more information on the maximum limit, refer to the ISP guidelines. The
recommended value is 1 to 2 MB.
In the System Administration mode, select [Tools] > [System Settings] > [E-mail/Internet
Fax Service Settings] > [E-mail Control] > [Maximum Total Data Size] to configure the
setting.
For more information on setting, refer "Maximum Total Data Size" (P.262).
Suitable image sizes are as follows:

16



Note
764
Authentication for transmission
SMTP authentication
POP before SMTP
Waiting time for POP authentication
Encryption communication (SSL)
Receiving specifications
Supported protocol
POP3 port number
Authentication method for POP3
E-mail processing after POP3 reception
Encryption communication (SSL)
• IMAP4 is not supported.
Operating with fixed address
Register the machine's IP address on a router or a server managing IP addresses for
domain control servers.
Operating with DHCP
Setting is not required. Depending on settings of the router and the DHCP server,
registration may be required. Confirm operation rules for the router and DHCP server you
are using. When access is restricted by MAC address, registration on the DHCP server may
be required.
A4 full-color 200 dpi with standard compression
A4 full-color 200 dpi with high compression
A4 black and white 200 dpi (text document)
A4 black and white 200 dpi (text & photo document)
• The sizes described above are applicable when sending e-mail. The actual size may be different.
: AUTH GSSAPI (only for Kerberos), AUTH
NTLMv2, AUTH NTLMv1, AUTH PLAIN,
AUTH LOGIN, and AUTH CRAM-MD5
: Plain and APOP
: cannot be changed
: supported
: POP3
: 110 (default)
: Plain and APOP
: deletes e-mail received from a server after
reception. Settings to store e-mail on the
server is not supported.
: not supported
: around 700 KB
: around 400 KB
: around 25 KB
: around 200 KB