Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 700

16 Appendix
Setting Item
Paper tray
Document size
16
Orientation
700
Item
Number
3 Sets the paper tray to be used for printing.
[0] : Auto
[1] (Default) : Tray 1
[2] : Tray 2
[3] : Tray 3
[4] : Tray 4
[5] : Tray 5
[6] : Tray 6 (HCF (2000 sheets)) or (HCF B1-S)
If printing from Tray 5, instruct printing and then operate the machine to
start printing. To cancel the setting, change the setting for "Tray 5
Confirmation".
Important • When Trays 1 to 4 or Trays 6 is selected, the paper size is determined by
the size of paper loaded in the tray, and thus [Paper Size] cannot be set.
Note • When [Auto] is selected and paper of the same size in the same orientation
in multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2
 Tray 3  Tray 4  Tray 6. If paper of the same size is loaded in multiple
trays but in different orientations, feeding of the paper loaded in the
landscape orientation is prioritized.
1 Sets the client-created document size.
[99] (Default)
[100]
[101]
[102]
[103]
[3]
[4]
[5]
[14]
[15]
[21]
[22]
[23]
[24]
[0]
The number of characters printed is: 80 characters/72 rows for continuous
form paper (10 x 12), 80 characters/66 rows for continuous form paper (10 x
11), 136 characters/72 rows for continuous form paper (15 x 12), and 136
characters/66 rows for continuous form paper (15 x 11).
Note • When a continuous form paper is selected for [Original Size], [Paper
Position] cannot be set.
• When [Preset%] or [Fit to Cut Sheet] is selected for [Reduce/Enlarge], the
machine automatically calculates the magnification based on a
combination of [Original Size] and [Paper Size]. If the ratio, however, is
outside the range of 45-210%, the document will not be reduced/
enlarged, and will be printed at a scale of 100%. When [2 Up] is selected,
the machine automatically calculates the magnification based on a
combination of [Original Size] and 1/2 of [Paper Size].
• The orientation set here is that of the document. It is not affected by the
orientation of paper loaded in the paper trays.
19 Sets the orientation of paper.
[0] (Default) : Portrait
[1] : Landscape
Value
: Paper
: Continuous form paper (10 x 12)
: Continuous form paper (10 x 11)
: Continuous form paper (15 x 12)
: Continuous form paper (15 x 11)
: A3
: A4
: A5
: B4
: B5
: 8.5 x 14
: 8.5 x 13
: 8.5 x 11
: 11 x 17
: Postcard