Alignment Adjustment Settings - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

16 Appendix

Alignment Adjustment Settings

Save the adjustment results for perpendicularity, skew, scale, and print position as an
alignment adjustment type, and then assign the type to a tray.
1
Load paper in a tray.
2
Press the <Log In/Out> button, and enter the System Administration mode.
For more information on how to enter the System Administration mode, refer to "System Settings Procedure" (P.128).
3
Select [Tools] on the Services Home screen.
4
Select [System Settings] > [Common Service
Settings] > [Maintenance].
5
Select [Alignment Adjustment].
Note
6
Select [Manual Alignment Adjustment]
7
Select the alignment adjustment type to set or
adjust, and then select [Change Settings].
8
Select [Name], and then select [Change
Settings].
16
9
Enter the type name, and select [Save].
Note
10
Select [Sample Printout].
684
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.
• We recommend that you use a name with which you can recognize the content.