Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 557

Error Code
033-536 [Cause] An error occurred during fax transmission.
033-537
[Remedy] Execute the operation again.
033-538 [Cause] An error occurred during fax transmission.
033-539
[Remedy] Execute the operation again. If the error still is not resolved, contact our Customer
033-540
Support Center.
033-541 [Cause] The recipient is not specified.
[Remedy] Specify the recipient correctly.
033-542 [Cause] A line was specified that is not connected.
[Remedy] Specify a connected line.
033-543 [Cause] The recipient (fax number) is incorrect.
[Remedy] Enter a correct fax number, and execute the operation again.
033-544
[Cause] The recipient's line is busy.
[Remedy] Wait for a while, and then execute the operation again.
033-545 [Cause] There was no response from the fax recipient.
[Remedy] Confirm that you specified the correct number, and execute the operation again. If the
same message is displayed again, the recipient may not support fax, or the recipient
machine may be powered off. Ask the recipient for details.
033-546 [Cause] A dial tone was not detected.
[Remedy] Check whether the line is connected correctly.
033-547 [Cause] Communication was terminated by a cause such as pressing the <Stop> button.
[Remedy] No measure is required.
033-548
[Cause] Cannot transmit manually because a line is unavailable.
[Remedy] Establish communication such as by telephone, and execute the operation again.
033-549 [Cause] Cannot use the Fax service because of causes such as memory is insufficient.
[Remedy] Wait for a while, and execute the operation again.
033-550 [Cause] Cannot execute another job because fax communication is in progress.
[Remedy] Wait until the job being communicated completes, and then execute the operation
again.
033-551 [Cause] You attempted to change a job immediately before fax or telephone communication
completed.
[Remedy] Wait for a while, and execute the operation again.
033-552
[Cause] The total quantity of error lines detected with G3 exceeded the set value.
[Remedy] Confirm the model of the other machine, and execute the operation again. If receiving,
ask the sender to send again.
033-553 [Cause] This machine does not have confidential or relay function. The F-code sent from the
other machine contains an instruction for a function not supported by the machine.
[Remedy] If necessary, check whether the sender entered an invalid F-code.
033-554 [Cause] The password was omitted or did not match in fax communication.
[Remedy] No measure is required.
033-555 [Cause] The password received from the other machine did not match the password for
receiving faxes on the machine.
[Remedy] Check whether the sender specified an incorrect machine password.
Cause and Remedy
Error Code
15
557