Paper Jams At The Tri-Fold Tray 2D And The Lever 2G When D2 Folder Unit Is Installed; Paper Jams At The Unit 4 And Knob 4A For The Finisher D2-P With Booklet Maker - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Paper Jams at the Tri-fold Tray 2d and the Lever 2g when D2 Folder Unit is Installed

1
Make sure that the machine has stopped
before opening the right cover of the finisher.
2
Pull out the tri-fold output tray 2d, swing the
lever 2g, and remove the jammed paper.
Note
3
Return the lever 2g to the original position and
push back the tri-fold output tray 2d.
4
Close the finisher right cover.
Note

Paper Jams at the Unit 4 and Knob 4a for the Finisher D2-P with Booklet Maker

1
Make sure that the machine has stopped
before opening the right cover of the finisher.
• If paper is torn, check for any torn pieces of
paper inside the machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher is
even slightly open.
Paper Jams
15
621