Alignment Adjustment Setup - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

16 Appendix

Alignment Adjustment Setup

The following describes how to save result of Auto Alignment Adjustment in Alignment
Adjustment Type and to assign to a tray.
1
Select a type to set the alignment adjustment
setting and select [Change Settings].
2
Enter the type name and select [Save].
Note
3
Select [Sample Printout].
4
Select a tray to assign the alignment adjustment settings and select 2 Sided, Output Color,
and Number of Sheets.
Note
5
Select <Start>.
The current sample printout is printed.
If the position of the sample printout is correct, a line is printed at a position 15 mm from
the edge of the paper. If the position of the line on the sample printout is misaligned, adjust
it.
Note
16
6
Select [Save].
7
Select [Close].
8
Check the sample printout, and adjust the position if it is misaligned.
680
• We recommend that you use a name with
which you can recognize the content.
• You are recommended to average the variations that you print three and more sheets.
• A dark black patch is printed on the image of side 1 and a light black patch is printed on the image
of side 2 of the sample printed with [Sample Printout]. A color patch is printed to show the paper
feed direction.
Black patch
Paper feed direction
Color patch
QR code