Step 2 Logout Method Using The Smart Card; Step 3 Registering Smart Card Information - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

14 Authentication and Accounting Features

Step 2 Logout Method Using the Smart Card

Perform the following steps to set how to logout authentication using the smart card.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
Note
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [User Details Setup].
7
Select [Smart Card Logout Timing], and then select [Change Settings].
8
Select the authentication logout method, and then select [Save].
9
Select [Close].

Step 3 Registering Smart Card Information

The system administrator can register smart cards using CentreWare Internet Services.
Note
Important • To display the online help for CentreWare Internet Services, users need to have the environment to
14
430
• The default user ID is "11111".
• The default passcode is "x-admin".
• The smart card information can be set from CentreWare Internet Services. For more information,
refer to the help of CentreWare Internet Services.
• The information used for authentication can also be set from CentreWare Internet Services.
For more information, refer to the help of CentreWare Internet Services.
connect to the internet. The communication fee shall be borne by you.