Paper Jams In The Output Tray; Paper Jams In The Transport Unit V1 - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

15 Problem Solving

Paper Jams in the Output Tray

1
Remove jammed paper from the output tray.
Note

Paper Jams in the Transport Unit V1

The following describes how to clear paper jams inside the Transport Unit V1 when the C3
Finisher (optional) or the C3 Finisher with Booklet Maker (optional) is installed.
Note
Paper Jams at the Handle [1c]
1
Make sure that the machine has stopped, and
open the Transport Unit V1 front door.
2
Move the handle [1c] to the right (1), and turn
the knob [1b] to the right (2).
3
15
Remove the jammed paper.
Note
602
• If paper is torn, check for any torn pieces of
paper inside the machine.
Paper Jams at the Handle [1c] ................................................................................................................................................. 602
Paper Jams at the Handle [1a]................................................................................................................................................. 603
• A remedy differs depending on where the paper jam occurs. Follow the instructions displayed and
remove the jammed paper.
• If paper is torn, check for any torn pieces of
paper inside the machine.