Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 719

Hide thumbs Also See for ApeosPort-V C7785:

Table of Contents

Sets the paper tray to be used for printing.

[0] (Default)

: Tray 6 (HCF B1-S) or (HCF2 (2000 sheets)

Important • When Trays 1 to 4, or Tray 6 is selected, the paper size is determined by the

size of paper loaded in the tray, and thus [Paper Size] cannot be set.

• When [Auto] is selected and paper of the same size in the same orientation

in multiple trays is loaded, paper will be fed in the order of Tray 1  Tray 2

 Tray 3  Tray 4  Tray 6. If paper of the same size is loaded in multiple

trays but in different orientations, feeding of the paper loaded in the

landscape orientation is prioritized.

Sets the default paper size. Only available when [Paper Tray] is set to [Auto].

Only cut sheet can be set.

[4] (Default)

[23] (Default)

: Custom Size

Important • When Trays 1 to 4, or Tray 6 is selected, [Paper Size] cannot be set. The

paper size loaded in the specified tray is displayed.

• When Trays 1 to 4, or Tray 6 is selected, the paper size is determined by the

size of paper loaded in the tray, and thus [Paper Size] cannot be set.

• Depending on the combination of [Original Size] and [Paper Size], [?] may

be displayed for the magnification. In this case, the document is printed at

a scale of 100%.

Sets the default paper size. Only available when [Paper Tray] is set to [Auto].

Only cut sheet can be set.

[4] (Default)

[23] (Default)

: Custom Size

Sets the output tray for the printouts.

[0] (Default)

: Right Top Tray

: Right Middle Tray (optional)

Set the orientation of paper.

[0] (Default)

PCL Emulation

Chapters

Table of Contents