Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 92

3 Maintenance
2
Move the lock lever, shown in the figure,
leftward to the position.
3
Securely hold the staple scrap container by its
R5 section, and take the container out of the
machine.
3
4
Put the old container into the plastic bag
supplied.
Important • Do not disassemble the container and return
5
Hold a new staple scrap container by its R5
section, and insert the container, bottom first,
into the machine.
Important • To prevent injury, do not put your fingers on
6
Push the R5 section of the container until the
lock lever moves to the
7
Close the right cover of the finisher.
Note
92
it to our Customer Support Center.
top of the container.
position.
• A message will be displayed and the machine will not operate if the right cover of the finisher is even
slightly open.