Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 531

Error Code
021-440 [Cause] The communication is disabled in 3G communication by way of 3Gnet-BOX with this
machine.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-500 [Cause] The following operation is performed when the Auditron mode for the Fax service is
enabled.


[Remedy] Wait for the active job finishes, and start the next job.
021-501
[Cause] The communication with the EP system via the internet failed.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
021-502 [Cause] An error occurred while connecting to the EP system via the Internet. There is a problem
with the address of the EP proxy server name.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
021-503 [Cause] An error occurred while connecting to the EP system via the Internet. There is a problem
with the address of the EP proxy server name.
[Remedy] Check the followings:




If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
021-504 [Cause] An error occurred while connecting to the EP system via the Internet.
[Remedy] Check the followings:




If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
021-505 [Cause] The SSL/TLS communication with the EP server failed.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
Cause and Remedy
While a Send Fax job is processing, another job that the Auditron mode is enabled
starts.
While another job that the Auditron mode is enabled is processing, a Send Fax job
starts.
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
LAN cable connection
DNS server address setting
The default gateway setting
The subnet mask setting
Error Code
15
531