Pdf Direct Print - Fuji Xerox ApeosPort-V 3065 Administrator's Manual

PDF Direct Print

PDF Direct Print is a feature that prints PDF files by directly using the lpr command instead
of a print driver. When this feature is used, the following items will be printed based on the
settings of [PDF] under [Print Mode].
Output Quantity
2 Sided Printing
Print Mode
Collate
Important
You cannot print DocuWorks files with Japanese fonts used.
Note
Two types of the PDF Direct Printing methods are available: the genuine Adobe PDF Direct Print and the non-
PostScript PDF Direct Print (PDF Bridge). You can select which method to prioritize in the System
Administration mode.
When you use the lpr command to print, specify the number of copies to be printed in the lpr command. The
copy quantity setting made on [Output Quantity] under [PDF] becomes invalid. If the copy quantity is not
specified in the lpr command, only one copy is printed.
Before you print PDF file using the lpr command, the LPD protocol of the machine must be started with the
control panel or CentreWare Internet Services.
PDF Direct Print supports PDF version 1.6.
PDF Direct Print Settings
This section describes the available settings with the PDF Direct Print feature.
The settings configured here are valid when printing PDF files without using
ContentsBridge provided by Fuji Xerox.
Note
For information on printing PDF files using ContentsBridge Utility, refer to the manual provided on the Media
(Software/Product Manual).
Setting Item Item
Number
Output quantity
2 sided printing
Print mode
401 Sets the number of copies to be printed.
[1-999] (Default: 1) : 1-999 sheets
402 Sets the 2 sided printing option.
[0] (Default) : 1 Sided
[1]: 2 Sided, Flip on Long Edge
[2]: 2 Sided, Flip on Short Edge
[2 Sided Print, Flip on Long Edge] prints 2 sided in the orientation so that
pages can be bound along the long edge.
[2 Sided Print, Flip on Short Edge] prints 2 sided in the orientation so that
pages can be bound along the short edge.
403 Selects which you prioritize: image quality or print speed.
[0] (Default): Standard
[1]: High Speed
[2]: Fine
The [Standard] setting prints in a standard speed and quality.
The [High Speed] setting prioritize the print speed.
The [Fine] quality setting prints in high quality but in a slower speed.
Layout
Paper Size
Print Processing Mode
Value
PDF Direct Print
16
657