Force Secure Watermark; Secure Watermark Defaults - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

 Decoding Passcode
You can assign a decoding passcode (4 to 12 characters) to a digital code to be embedded
in a document. Assigning a decoding passcode allows you to restrict access to a digital code
analysis application.
Important • If you forget the decoding passcode or your passcode entry does not match that registered on
Note
 Custom Digital Watermark
Specify a digital code string to embed in a document. You can enter up to 32 single-byte
characters.
For information about how to enter characters, refer to "Entering Text" (P.37).

Force Secure Watermark

You can set whether or not to forcibly use the Force Watermark feature by jobs.
Note
 Copy
Set whether or not to use the Force Secure Watermark feature when copying a document.
When you select [On], the setting of [Secure Watermark] is fixed to [On] in the [Output
Format] screen of the Copy feature.
 Client Print
Set whether or not to forcibly use the Force Secure Watermark feature when printing from
a client computer.
To prioritize the settings in the machine, select [Allow Device Settings to Override], and to
prioritize the settings of the software such as TrustMarkingBasic (sold separately) or the
print server, select [Allow Client Settings to Override].
Note
 Print Stored File
Set whether or not to forcibly use the Force Secure Watermark feature when printing a
document in a folder.
 Media Print
Set whether or not to forcibly use the Force Secure Watermark feature when printing for
Media Print - Text and Photos.
 Print Fax
Set whether or not to forcibly use the Force Secure Watermark feature when printing a
document received by fax.
 Report
Set whether or not to forcibly use the Force Secure Watermark feature when printing a
report/list.

Secure Watermark Defaults

You can set the default value of the Secure Watermark feature.
PaperSecurity Analyzer, you will not be able to analyze the digital code on PaperSecurity Analyzer.
Be sure to place strict controls on the decoding passcode.
• To analyze digital codes, PaperSecurity Analyzer (sold separately) is required. For information on
how to operate PaperSecurity Analyzer, refer to the manual provided with the application.
• To set no password, leave the password blank, and select [Save].
• You can authorize a user to temporarily cancel force watermark printing. For more information, refer
to "User Roles and Authorization Groups" (P.410).
• The setting method applies to both the Watermark and Secure Watermark features.
Common Service Settings
171
5