Fuji Xerox ApeosPort-V C7785 Administrator's Manual page 556

15 Problem Solving
Error Code
033-520 [Cause]
[Remedy] Check whether the other machine can correspond to reception of PWD/SID, and
033-521
[Cause]
[Remedy] Confirm the condition of the machine (memory is full, paper has run out, or other
033-522 [Cause]
[Remedy] Ask the sender to execute the operation again.
033-523
[Cause]
[Remedy] Confirm the connection of the line (Channel 1) and connect it correctly, and then
033-524
[Cause]
[Remedy] Confirm the connection of the line (Channel 2) and connect it correctly, and then
033-525 [Cause]
[Remedy] Confirm the connection of the line (Channel 3) and connect it correctly, and then
033-526 [Cause]
[Remedy] Confirm the model of the sender's machine, and then execute the operation again. If
033-527
[Cause]
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-528 [Cause]
[Remedy] Ask the sender to send again.
033-529 [Cause]
[Remedy] Confirm the other machine has a problem, and then execute the operation again.
033-530
[Cause]
[Remedy] Confirm the procedure for DTMF in the User Guide, and then execute the operation
033-531 [Cause]
[Remedy] Confirm the condition of the other machine (memory is full, paper has run out, or other
15
033-532 [Cause]
033-533
[Remedy] Execute the operation again. If receiving, ask the sender to send again.
033-534 [Cause]
[Remedy] Do not specify multiple sets.
033-535
[Cause]
[Remedy] Confirm information such as the recipient and folder information, and execute the
556
Cause and Remedy
The other machine cannot correspond to reception of PWD/SID.
execute the operation again.
An error occurred during fax transmission.
conditions), and execute the operation again.
An error occurred during fax transmission.
The line (Channel 1) is not connected correctly.
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
The line (Channel 2) is not connected correctly.
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
The line (Channel 3) is not connected correctly.
execute the operation again. When the machine is connected to other device such as a
home gateway and a terminal adapter, confirm whether the device works properly.
An error occurred during fax transmission.
receiving, ask the sender to send again.
An error occurred during fax transmission.
An error occurred during fax transmission.
An error occurred during fax transmission.
Received a procedure disabled signal.
again.
Received a command rejection signal.
conditions), and execute the operation again.
An error occurred during fax transmission.
The other machine does not offer a feature to print the number of document sets sent.
An error occurred during fax transmission.
operation again.