Density Uniformity Adjustment (Semi Auto Process Using Scanner) - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

16 Appendix

Density Uniformity Adjustment (Semi Auto Process Using Scanner)

This section describes manual adjustment of the density uniformity.
Note
Density Uniformity Adjustment
This section describes manual adjustment of the density uniformity.
1
Load paper in a tray.
Note
2
Press the <Log In/Out> button, and then enter the System Administration mode.
For how to enter the System Administration mode, refer to "System Settings Procedure" (P.128).
3
Select [Tools] on the Services Home screen.
4
Select [System Settings] > [Common Service Settings] > [Maintenance].
5
Select [Density Uniformity Adjustment].
Note
6
Select [Semi Auto Process Using Scanner].
7
Select [Print Calibration Chart].
16
692
• Output paper for the density uniformity adjustment is counted for the number of printed pages. For
more information, refer to "Billing Information" (P.106)
• When using a smart card authentication system such as IC Card Gate, you may be requested
authentication before printing or scanning a calibration chart.
• For the paper size, select 210mm (width) x 210mm (length) or larger.
• Select [ ] to return to the previous screen or
[ ] to move to the next screen.