Cleaning The Document Feeder Roller - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Hide thumbs Also See for ApeosPort-V C7785:
Table of Contents

Advertisement

2
Holds the green lever to open the
chute. Wipe the constant velocity
transport glass with a soft cloth
moistened with water to remove any
dirt, and then wipe it with a soft, dry
cloth.
Important • Do not push the constant
Note
3
Push the center-left side of the document cover to close the belt area until it clicks into
place.

Cleaning the Document Feeder Roller

If the document feeder roller becomes soiled, smudges may appear on copies, faxes, or
scanned documents and document jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or
1
Pull up the handle of the document feeder top
cover, and open the top cover until it stops.
Note
2
While turning the roller, gently clean it with a
soft cloth moistened with water.
Important • Do not use cleaning agents other than water
Note
3
Close the document feeder top cover until it clicks into place.
4
Close the document feeder left cover until it clicks into place.
velocity transport glass strongly
since it is easy to damage the
film around the optical glass
surface.
• Do not use cleaning agents other
than water or neutral detergent.
• If dirt does not come off easily,
gently wipe it with a soft cloth
moistened with a small amount
of neutral detergent.
coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to malfunction or
damage documents during copying or printing.
• When you fully open the cover, it enters a
fixed position. Open the cover gently.
or neutral detergent.
• Use a cloth firmly wrung to prevent water
drops from falling into the machine. If water
gets into the machine, it may cause machine
malfunction. Drops of water on internal
components may cause a malfunction.
• If dirt does not come off easily, gently wipe it
with a soft cloth moistened with a small
amount of neutral detergent.
Cleaning the Machine
Chute
Constant velocity
transport glass
3
95

Advertisement

Table of Contents
loading

Table of Contents