Given Name; Transfer Protocol - Fuji Xerox ApeosPort-V C7785 Administrator's Manual

Given Name

Enter a recipient given name with up to 32 single-byte characters.
For information about how to enter characters, refer to "Entering Text" (P.37).
Custom Item 1
The attribute name set as [Attribute Name of Custom Item 1] is shown as the item name.
By factory default, the item name is set to "Telephone Number". You can input any
information as an auxiliary item. Up to 20 single-byte characters are allowed. This item is
suitable for information represented by a shorter character string, such as telephone
number and employee number.
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.223).
Custom Item 2
The attribute name set as [Attribute Name of Custom Item 2] is shown as the item name.
By factory default, the item name is set to "Office". You can input any information as an
auxiliary item. Up to 40 single-byte characters can be used. This item is suitable for
information represented by a longer character string, such as company name and
department name.
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.223).
Custom Item 3
The attribute name set as [Attribute Name of Custom Item 3] is shown as the item name.
By factory default, the item name is set to "Department". You can input any information as
an auxiliary item. Up to 60 single-byte characters can be used. This item is suitable for
information represented by a much longer character string, such as company division name
and company address.
For more information on the item name, refer to "Attribute Name of Custom Items 1, 2, and 3" (P.223).
S/MIME Certificate (ApeosPort Series Models Only)
Allows you to link an S/MIME certificate. The S/MIME certificate must be registered in
advance.
To link a certificate, select [Attach/Change Link] and select a certificate in a screen
displayed. To remove a link, select [Remove Certificate].
Important • If a certificate linked to an S/MIME certificate in the Address Book is deleted by some reasons such
Note
For more information on the certificate, refer to "Encryption and Digital Signature Settings" (P.389).

Transfer Protocol

Set the transfer protocol. You can select either [FTP] or [SMB].
Server Name/IP address
Enter a name or an IP address of a forwarding destination server.
Shared Name (SMB Only)
Enter the shared name set for the SMB folder.
Important • If the "/" mark is used at the top of a shared name, a job flow cannot read the shared name correctly.
as hard disk initialization and the deletion of the certificate, the certificate linked to the S/MIME
certificate will be invalid. Even if you re-register the S/MIME certificate, you have to manually link it
again.
• If many certificates are registered on the machine, it may take a long time to link a certificate.
Do not use the "/" mark at the top of a shared name.
Setup
5
293