Time And Date - Mitel 6920 User Manual

C
USTOMIZING YOUR PHONE
Specifying the Input Language Using the Mitel Web UI
Click on Basic Settings > Preferences > Language Settings .
1.
Select a language from the Input Languagefield. Setting this field allows you to specify the language
2.
to use when entering text and characters in the Mitel Web UI and IP phone UI. Valid values are:
English (default)
–
Français (French)
–
Español (Spanish)
–
Deutsch (German)
–
Italiano (Italian)
–
Português (Portuguese)
–
Русский (Russian)
–
Nordic
–
ελληνικά (Greek)
–
: All languages may not be available for selection. The available input languages are
NOTE
dependent on the configuration enabled by your System Administrator.
Click Save Settings.The change is dynamic. The phone and the Mitel Web UI allow you to enter text
3.
and characters in the language you selected.

Time and Date

On the IP phones, the following time and date sub-options are available to be configured:
Settings:
•
Time Format
–
Daylight Savings
–
Date Format
–
Time Zone
•
Set Date and Time:
•
Use Network Time (configure time servers)
–
Enter Time and Date
–
: All time and date settings can be configured using the IP phone UI. Time/Date Formats and Time
NOTE
Servers are the only two time and date settings that can be configured using the Mitel Web UI.
T D
IME AND ATE
39