2) Remove the three flat cables
and disconnect the connector
3) Remove the five mounting screws
4. Removing the Control Panel CPU PCB
1) Remove the five mounting screws
plate
and the control panel CPU PCB
COPYRIGHT © 1997 CANON INC.
(J912, J913, J916) of the control panel CPU PCB,
(J956) of the inverter PCB.
, and remove the touch panel
Figure 7-425
, and remove the control panel right support
Figure 7-426
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
.
.
7-25