2. Remove the Driver PCB [1].
• 11 connectors [2]
• 1 flat cable [3]
• 3 screws [4]
• 1 claw [5]
1x
11x
3x
[4]
1x
Removing the Relay PCB
■ Preparation
1. Removing the Right Cover.(Refer to
Right Cover" on page
2. Removing the Left Cover.(Refer to
Left Cover" on page
3. Removing the Rear Upper Cover.(Refer to
"Removing the Rear Upper Cover" on page
4. Removing the ADF Unit + Reader Unit.(Refer to
"Removing the ADF Unit + Reader Unit" on page
130)
[3]
[5]
[1]
[2]
[4]
[2]
"Removing the
120)
"Removing the
118)
123)
5. Removing the Right Front Cover.(Refer to
"Removing the Right Front Cover" on page
6. Removing the Upper Cover.(Refer to
Upper Cover" on page
■ Procedure
1. Disconnect the flat cable [1] and the 7 connectors
[2].
8x
[1]
[2]
2. Remove the harness guide [1].
• 1 screw [2]
• 1 hook [3]
1x
1x
[1]
168
4. Disassembly/Assembly
"Removing the
125)
[2]
[2]
[3]
121)
[2]