■ Procedure
1. Remove the Environment Sensor.
2. Remove the Harness.
Removing the Memory Relay PCB
■ Preparation
1.
"Removing the Toner Cartridge" on page 85
2.
"Removing the Right Cover" on page 88
3.
"Removing the Left Cover" on page 86
4.
"Removing the ADF Unit + Reader Unit" on page 97
5.
"Removing the Upper Front Cover" on page 94
6.
"Removing the Upper Left Front Cover" on page 95
7.
"Removing the Upper Right Front Cover" on page 95
8.
"Removing the Control Panel Unit" on page 125
9.
"Removing the Upper Cover Unit " on page 96
1x
1x
1x
1x
134
5. Parts Replacement and Cleaning