GeoVision GV-IPCAM User Manual page 68

8. Replace the silica gel bag. Paste the sticker to the front side of the
silica gel bag. Press the sticker several times to make sure it adheres
properly. Paste the silica gel bag to the indicated place.
Figure 4-9
IMPORTANT:
1. The gel bag loses its effectiveness when the dry camera is
opened. To prevent the lens from fogging up, replace the silica gel
bag every time you open the camera, and conceal the silica gel
bag in the camera within 2 minutes of exposing to open air.
2. Allow the silica gel bag to absorb moisture for at least 5 hours
before operating the camera.
9. Refer to step 7 to plug the connectors and secure the camera cover.
42