GeoVision GV-IPCAM User Manual page 171

4. Screw in a plastic clip to the blue screw, hold it with one hand and use
a screw driver to rotate the blue screw until the plastic clip moves half
way down.
Figure 10-10
5. Secure a T-cap on top of the blue screw with a small screw cap and a
T-cap screw. Do not tighten the small screw cap so that the plastic
clip can move down freely.
Figure 10-11
6. Repeat steps 4 and 5 for the other two blue screws.
Plastic Clip
T-cap screw
small screw cap
T-cap
plastic clip
10
Vandal Proof IP Dome
145