GeoVision GV-IPCam Hardware Manual
  1. Manuals
  2. Brands
  3. GeoVision Manuals
  4. Security Camera
  5. GV-IPCAM
  6. Hardware manual
GeoVision GV-IPCam Hardware Manual

GeoVision GV-IPCam Hardware Manual

Hide thumbs Also See for GV-IPCam:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
GV-IPCam
Cube Camera
Mini Fixed Dome
Mini Fixed Rugged Dome
Target Mini Fixed Dome
Target Mini Fixed Rugged Dome
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
Hardware Manual
ICH265HISIV106-A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GV-IPCam and is the answer not in the manual?

Questions and answers

Related Manuals for GeoVision GV-IPCam

Summary of Contents for GeoVision GV-IPCam

  • Page 1 GV-IPCam Hardware Manual Cube Camera Mini Fixed Dome Mini Fixed Rugged Dome Target Mini Fixed Dome Target Mini Fixed Rugged Dome Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
  • Page 2 Dispose of used batteries according to the instructions. Safety Notice The GV-IPCAM uses a Lithium battery as the power supply for its internal real-time clock (RTC). The battery should not be replaced unless required! If the battery does need replacing, please observe the following: •...
  • Page 3 GeoVision. Every effort has been made to ensure that the information in this manual is accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein.

  • Page 4: Table Of Contents

    Contents   Contents ................i   Options ................iv   Note for USB Storage and WiFi Adapter ....... vi   Note for Installing Camera Outdoor......vii Chapter 1 Mini Fixed Dome (Part I) & Mini Fixed   Rugged Dome..............1   1.1 Packing List ................4  ...
  • Page 5   2.4 Installation ................33   2.5 Connecting the Camera............36   2.6 Loading Factory Default............38   Chapter 3 Target Mini Fixed Dome........39   3.1 Packing List ................40   3.2 Features .................41   3.3 Overview ................43   3.4 Installation ................45   3.5 Connecting the Camera............48  ...
  • Page 6   6.5 Connecting the Camera............80   6.6 Loading Factory Default............81...

  • Page 7: Options

    Options Optional devices can expand your camera’s capabilities and versatility. Contact your dealer for more information. Device Description The power adapter is available for all Mini Fixed Dome, Cube Camera, and Advanced Cube Camera. Power Adapter Contact your sales representative for the countries and areas supported.
  • Page 8 Device Description The plastic PG21 conduit connector is used for running the wires of Target Mini Fixed Rugged Plastic PG21 Dome through a 1/2” conduit pipe. Conduit Connector The connector is not supported by GV-EFD4700 and GV-MFD2700 Series / 4700 Series. GV-Relay V2 Only supported by GV-MFD2700 Series / 4700 Series.

  • Page 9: Note For Usb Storage And Wifi Adapter

    Note for USB Storage and WiFi Adapter Mind the following limitations and requirements for using USB storage and GV-WiFi Adapter: The USB hard drive must be of 2.5’’ or 3.5’’, version 2.0 or above. The USB hard drive’s storage capacity must not exceed 2TB. USB flash drives and USB hubs are not supported.

  • Page 10: Note For Installing Camera Outdoor

    Note for Installing Camera Outdoor When installing Mini Fixed Rugged Dome outdoor, be sure that: 1. The camera is set up above the junction box to prevent water from entering the camera along the cables. 2. Any PoE, power, audio and I/O cables are waterproofed using waterproof silicon rubber or the like.

  • Page 12: Chapter 1 Mini Fixed Dome (Part I) & Mini Fixed Rugged Dome

    Mini Fixed & Rugged Dome Chapter 1 Mini Fixed Dome (Part I) & Mini Fixed Rugged Dome The Mini Fixed Dome (GV-MFD) and Mini Fixed Rugged Dome (GV-MDR) are fixed, mini-sized ceiling-mount network cameras. The GV-MDR series is designed for outdoor surveillance, conforming to IK10 and IP67 standards.
  • Page 13 Mini Fixed Dome (GV-MFD) Model No. Specifications Description Fixed Iris, f: 4 mm, 1.3 MP Low Lux, F/1.5, 1/3’’ M12 GV-MFD120 H.264, Color Mount Fixed Iris, f: 2.54 1.3 MP / 2 MP / 3 GV-MFD130 mm, F/2.8, 1/2.5’’ MP / 5MP, H.264, GV-MFD320 M12 Mount Color...
  • Page 14 Mini Fixed & Rugged Dome Model No. Specifications Description Fixed Iris, f: 2.3mm, 2 MP Super Low GV-MFD2501-6F Fixed F/2.2, 1/3’’ M12 Lux / 3 MP WDR Lens GV-MFD3401-6F Mount Pro, H.264, Color Mini Fixed Rugged Dome (GV-MDR) Model No. Specifications Description GV-MDR220...

  • Page 15: Packing List

    USB / Audio Y-cable (for GV-MFD1501 series / 2401 series / 2501 series / 3401 series / 5301 series) • Power Adapter • GV-IPCAM H.264 Software DVD • GV-Software DVD • Warranty Card Note: The power adapter can be excluded upon request.
  • Page 16 • Adhesive Tape for Silica Gel Bag x 2 • Ferrite core for vehicle installation • GV-IPCAM H.264 Software DVD • GV-Software DVD Note: 1. The power adapter can be excluded upon request. 2. When purchasing GV-MDR1500 / 3400 / 5300, choose one of the two LAN connector types (for motor vehicles or for general use).

  • Page 17: Features

    1.2 Features • Image sensor GV-MFD Camera Model Image Sensor GV-MFD120 1/3’’ progressive scan low lux CMOS GV-MFD130 1/2.5’’ progressive scan CMOS GV-MFD320 1/3’’ progressive scan super low lux GV-MFD1501 series CMOS 1/2.8’’ progressive scan super low lux GV-MFD2501 series CMOS GV-MFD2401 series 1/3.2’’...
  • Page 18 Mini Fixed & Rugged Dome GV-MFD Camera Model Frame Rate GV-MFD120 GV-MFD130 Up to 30 fps at 1280 x 1024 GV-MFD1501 series GV-MFD2401 series Up to 30 fps at 1920 x 1080 GV-MFD2501 series GV-MFD320 Up to 20 fps at 2048 x 1536 GV-MFD3401 series GV-MFD5301 series Up to 10 fps at 2560 x 1920...
  • Page 19 • 2-axis mechanism (GV-MFD series); 3-axis mechanism (GV-MDR series) Camera Type Tilt Rotate GV-MFD series -45° ~ +45° 0° ~ 90° GV-MDR series -45° ~ +45° 0° ~ 90° 0° ~ 360° • Micro SD card slot (SD/SDHC) for local storage •...

  • Page 20: Overview

    Mini Fixed & Rugged Dome 1.3 Overview 1.3.1 GV-MFD120 / 130 / 320 Figure 1-1 Name Description Resets the camera to factory default. For Default Button details, see 1.6 Loading Factory Default. Lens Receives image inputs. Tilt Screw Loosens the screw to adjust tilt angle. Microphone Provides one-way audio.
  • Page 21 Name Description LED Indicators See LED Indicators below. Memory Card Slot Inserts a micro SD card (SD/SDHC, version 2.0 only, Class 10) to store recording data. LED Name Description 1. Link Turns on when the network is connected. 2. ACT Turns on when data are being transmitted.

  • Page 22: Gv-Mfd1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series

    Mini Fixed & Rugged Dome 1.3.2 GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series Figure 1-2 Name Description Microphone Receives sound. Pan Screw Loosens the screw to pan. Lens Receives image inputs. Tilt Screw Loosens the screw to adjust tilt angle.
  • Page 23 Figure 1-3 LED Name Description 1. Link Turns on (green) when the network is connected. 2. ACT Turns on (orange) when data are being transmitted. 3. Status Turns on (red) when the system is ready. 4. Power Turns on (green) when power is on. Note: For details on limitations and requirements of the USB port, refer to Note for USB Storage and WiFi Adapter at the beginning of this manual.

  • Page 24: Gv-Mdr

    Mini Fixed & Rugged Dome 1.3.3 GV-MDR Figure 1-4 Name Description Silica gel bag Absorbs the moisture inside the camera. Prevents water or moisture from entering Conceal paper the camera. Lens Receives image inputs. Rotation Disc Rotates the camera lens. Pan Disc Pans the camera lens.
  • Page 25 Name Description Resets the camera to factory default. For Default Button details, see 1.6 Loading Factory Default. Turns red when the power is on. Flashes Power and status orange light twice when the system is ready. LAN LED Turns on when the network is connected. Inserts a micro SD card (SD/SDHC, Memory Card Slot version 2.0 only, Class 10) to store...
  • Page 26 Mini Fixed & Rugged Dome Small Waterproof Connector For this connector type, see 1.4.2 GV-MDR to install the supplied cable connector. 42.8 mm (1.69")

  • Page 27: Installation

    Connect the camera to network and power. For details, see 1.5 Connecting the Camera. Access the live view. For details, see 2.1 Accessing the Live View, GV-IPCam Firmware Manual. Adjust the angles based on the live view. Pan Adjustment Tilt Adjustment...
  • Page 28 Mini Fixed & Rugged Dome Adjust image clarity using the GV-IP Device Utility program. For details, see 2.3 Adjusting Image Clarity, GV-IPCam Firmware Manual. Insert a Micro SD card (SD/SDHC, version 2.0 only, Class 10) into the memory card slot (No. 7, Figure 1-1).

  • Page 29: Gv-Mdr Series

    1.4.2 GV-MDR Series Paste the installation sticker on the desired location. The arrow should point toward the direction that the camera faces. Drill one hole on each of the two curves for screw anchors. Drill the circle (30 mm in diameter) if you want to run the cable into the ceiling. 30 mm Drill a hole on each...
  • Page 30 Mini Fixed & Rugged Dome Install the cable connector to waterproof the cable. You should have 5 parts: Figure 1-10 Prepare an Ethernet cable with the RJ-45 connector on one end only. Figure 1-11 Connect the Ethernet cable to the camera cable. Paste the sticker to the camera cable and slide in all the components as shown below.
  • Page 31 Figure 1-13 IMPORTANT: Item 5 must be secured tightly to waterproof the cable. Access the live view. For details, see 2.1 Accessing the Live View, GV-IPCam Firmware Manual. Adjust the angles based on the live view. Pan Adjustment Figure 1-14...
  • Page 32 Figure 1-16 Adjust image clarity using the GV-IP Device Utility program. For details, see 2.2 Adjusting Image Clarity, GV-IPCam Firmware Manual. 10. Insert a Micro SD card (SD/SDHC, version 2.0 only, Class 10) into the memory card slot (No. 11, Figure 1-2).
  • Page 33 13. Optionally conceal the cable opening with the supplied cable stopper. Cable stopper Figure 1-17...

  • Page 34: Connecting The Camera

    Mini Fixed & Rugged Dome 1.5 Connecting the Camera Refer to the wire definition and illustrations below to connect the power and network. 1.5.1 Wire Definition GV-MFD120 / 130 / 320 The data cable provides connections for power and network access. The wires are illustrated and defined below: Figure 1-18 Wire Color...

  • Page 35: Power And Network Connection

    1.5.2 Power and Network Connection Use one of the following methods to power on and connect your camera to network: • Wired connection with PoE: Use a Power over Ethernet (PoE) adapter to connect the camera to the network, and the power will be provided at the same time.

  • Page 36: Vehicle Installation

    Mini Fixed & Rugged Dome Connect the camera to network using a network cable. 1.5.3 Vehicle Installation To install the Mini Fixed Rugged Dome on a vehicle, clip the ferrite core to the camera cable. In accordance to EN 50155, the ferrite core is used for reduction of the cable-based and radiated interferences, ensuring stable image quality.

  • Page 37: Loading Factory Default

    1.6 Loading Factory Default 1. Keep the power and network cables (or PoE) connected to the camera. 2. Press and hold the default button. Default button Status LED Figure 1-22 (GV-MFD120 / 130 / 320) Default button Figure 1-23 (GV-MFD1501 Series / 2401 Series / 2501 Series / 3401 Series / 5301 Series) 3.

  • Page 38: Chapter 2 Mini Fixed Dome (Part Ii)

    Mini Fixed Dome (Part II) Chapter 2 Mini Fixed Dome (Part II) The GV-MFD2700 Series / 4700 Series offers an indoor, fixed, mini-sized network camera with 3-axis mechanism for easy and flexible installation. GV-MFD2700 Series / 4700 Series can support H.265 video codec to achieve better compression ratio while maintaining high picture quality at reduced network bandwidths.

  • Page 39: Packing List

    H.265 Mini Fixed IP Dome Screw x 2 Screw Anchor x 2 Focus Adjustment Ring Installation Sticker Audio and I/O extended cable Torx Wrench GV-IPCAM Software DVD GV-NVR Software DVD Warranty Card Note: Power adapters can be purchased upon request.

  • Page 40: Features

    Mini Fixed Dome (Part II) 2.2 Features • Image sensor Camera Model Image Sensor GV-MFD2700 Series 1/2.8’’ progressive scan low lux CMOS 1/3” progressive scan super low lux GV-MFD 4700 Series CMOS • Frame rate: Camera Model Frame Rate GV-MFD 2700 Series Up to 30 fps at 1920 x 1080 Up to 25 fps at 2560 x 1440 GV-MFD 4700 Series...
  • Page 41 • Privacy mask • IP address filtering • Recording assigned by GV-Edge Recording Manager (Windows & Mac) • Support for iPhone, iPad, Android and 3GPP • 31 languages on Web interface • ONVIF (Profile S) conformant...

  • Page 42: Overview

    Mini Fixed Dome (Part II) 2.3 Overview Figure 2-1 Name Description Lens Receives image inputs. Pan Screw Loosens the screw to adjust pan angle. Tilt Screw Loosens the screw to adjust tilt angle. Default Resets the camera to factory default. For details, Button see 2.6 Loading Factory Default.
  • Page 43 Power Turns on (green) when power is on. Link Turns on (green) when the network is connected. Turns on (orange) when data are being transmitted.

  • Page 44: Installation

    Mini Fixed Dome (Part II) 2.4 Installation The Mini Fixed Dome can be installed on the wall or the ceiling. Before installing the camera, make sure the installing site is shielded from rain and moisture. Open the housing cover by unscrewing the three screws. Figure 2-2 Place the camera where you want to install it, and make 2 marks on the ceiling or the wall for screw anchors.
  • Page 45 Secure the camera to the ceiling or the wall with the supplied screws. Access the live view. For details, see 2.1 Accessing the Live View, GV-IPCam Firmware Manual. Adjust image clarity using the GV-IP Device Utility program. For details, see 2.2 Adjusting Image Clarity, GV-IPCam Firmware Manual.
  • Page 46 Mini Fixed Dome (Part II) 10. Loosen the tile screw, pan screw or rotational screw. Adjust the angles based on the live view as needed, and tighten the screws again. Figure 2-5 11. Place the housing cover back and turn to secure it.

  • Page 47: Connecting The Camera

    Wire Color Definition Digital In Yellow Digital Out Black Ground Red RCA Audio in Green RCA Audio out Figure 2-6 For details on how to enable an installed I/O device, see 4.2 I/O Settings, GV-IPCam Firmware Manual.
  • Page 48 Mini Fixed Dome (Part II) 2.5.2 Voltage Load Expansion (Optional) The camera can only drive a maximum load of 200mA 5V DC . To expand the maximum voltage load to 10A 250V AC , 10A 125V AC or 5A 100V DC , connect the camera to a GV-Relay V2 module (optional product).

  • Page 49: Loading Factory Default

    2.6 Loading Factory Default Keep the power connected to the camera. Press and hold the default button for about 8 seconds . Release the button when the status LED blinks. For details, see 1.6 Lading Factory Default. Figure 2-7...

  • Page 50: Chapter 3 Target Mini Fixed Dome

    Target Mini Fixed Dome Chapter 3 Target Mini Fixed Dome The Target Mini Fixed Dome (GV-EFD) is an indoor, fixed, mini-sized network camera equipped with an automatic IR-cut filter and IR LEDs for day and night surveillance. Adjustable in 2 axis (pan and tilt), it offers an entry-level surveillance solution with all the essential features and excellent image quality.

  • Page 51: Packing List

    • Target Mini Fixed Dome (for GV-EFD1100 Series / 2100 Series) • H.265 Mini Fixed Dome (for GV-EFD4700 Series) • Screw x 2 • Screw Anchor x 2 • Focus Adjustment Ring • GV-IPCAM Software DVD • GV-Software DVD • Warranty Card Note: Power adapters can be purchased upon request.

  • Page 52: Features

    Target Mini Fixed Dome 3.2 Features • Image sensor Camera Model Image Sensor GV-EFD1100 Series 1/3’’ progressive scan low lux CMOS GV-EFD2100 Series 1/2.8’’ progressive scan low lux CMOS 1/3” progressive scan super low lux GV-EFD4700 Series CMOS • Frame rate: Camera Model Frame Rate GV-EFD1100 Series...
  • Page 53 • Tampering alarm • Text overlay • Privacy mask • IP address filtering • NAS Recording (for GV-EFD1100 / 2100 Series) • Recording assigned by GV-Edge Recording Manager (Windows & Mac) • Support for iPhone, iPad, Android and 3GPP • 31 languages on Web interface •...

  • Page 54: Overview

    Target Mini Fixed Dome 3.3 Overview Figure 3-1 Name Description Lens Receives image inputs. Pan Screw Loosens the screw to adjust pan angle. Tilt Screw Loosens the screw to adjust tilt angle. Microphone Receives sound. Default Resets the camera to factory default. For details, Button see 3.6 Loading Factory Default.
  • Page 55 To use the TV out function, connect the supplied black BNC connector to a monitor and select your signal format (NTSC or PAL) at the TV Out field on the Web interface. The default signal format is NTSC. For details, see 4.1.1 Video Settings, GV-IPCam Firmware Manual.

  • Page 56: Installation

    Target Mini Fixed Dome 3.4 Installation The Target Mini Fixed Dome can be installed on the wall or the ceiling. Before installing the camera, make sure the installing site is shielded from rain and moisture. 12. Open the housing cover by turning. Figure 3-2 13.
  • Page 57 BNC connector to a monitor and select your signal format (NTSC or PAL) at the TV Out field on the Web interface. The default signal format is NTSC. For details, see 4.1.1 Video Settings, GV-IPCam Firmware Manual. 19. Adjust image clarity using the GV-IP Device Utility program. For...
  • Page 58 Target Mini Fixed Dome 20. Loosen the tile screw, pan screw or rotational screw. Adjust the angles based on the live view as needed, and tighten the screws again. Figure 3-5 21. Place the housing cover back and turn to secure it.

  • Page 59: Connecting The Camera

    The power and status LEDs shall turn on (green). Use a standard network cable to connect the camera to your network. You are ready to access the live view, adjust the image clarity and configure the basics. See Getting Started, Chapter 2, GV-IPCam Firmware Manual.

  • Page 60: Loading Factory Default

    Target Mini Fixed Dome 3.6 Loading Factory Default Keep the power connected to the camera. Press and hold the default button for about 8 seconds . Release the button when the status LED blinks. For details, see 1.6 Lading Factory Default. Figure 3-7 Figure 3-8...

  • Page 61: Chapter 4 Target Mini Fixed Rugged Dome

    Chapter 4 Target Mini Fixed Rugged Dome The Target Mini Fixed Rugged Dome (GV-EDR) is an outdoor, fixed, mini- sized network camera equipped with an automatic IR-cut filter and IR LEDs for day and night surveillance. Adhering to IK10 and IP67 standards, it offers an entry-level outdoor surveillance solution with all the essential features and excellent image quality.

  • Page 62: Packing List

    • Adhesive Tape for Silica Gel Bag x 2 • Concave Hexagon Wrench • Ruler • Screw for Conduit Converter x 2 • GV-IPCAM Software DVD • GV-Software DVD • Warranty Card Note: Power adapters can be purchased upon request.
  • Page 63 Note: You can choose to run the wires through a conduit pipe. After you have threaded all the wires, install the supplied conduit converter with a PG21 conduit connector and a self-prepared conduit pipe (of 1/2’’, 3/4’’ or 1’’) to the camera. Do not use a 1/2’’ pipe if you use the power adapter for power supply because the adapter cannot be threaded through.

  • Page 64: Features

    Target Mini Fixed Rugged Dome 4.2 Features • Image sensor Camera Model Image Sensor GV-EDR1100 Series 1/3’’ progressive scan low lux CMOS GV-EDR2100 Series 1/2.8’’ progressive scan low lux CMOS GV-EDR4700 Series 1/3” progressive scan super low lux CMOS • Dual streams from H.264 or MJPEG •...
  • Page 65 • Text overlay • Privacy mask • IP address filtering • Megapixel lens • NAS Recording (excluding GV-EDR4700 Series) • Recording assigned by GV-Edge Recording Manager (Windows & Mac) • Support for iPhone, iPad, Android and 3GPP • 31 languages on Web interface •...

  • Page 66: Overview

    Target Mini Fixed Rugged Dome 4.3 Overview Figure 4-1 Name Description Lens Receives image inputs. Tilt Screw Loosens the screw to adjust tilt angle. Pan Screw Loosens the screw to adjust pan angle. Default Resets the camera to factory default. For details, Button see 4.6 Loading Factory Default.

  • Page 67: Installation

    4.4 Installation The Target Mini Fixed Rugged Dome can be installed on the wall or ceiling. You must use the supplied waterproof rubber set to waterproof the cable. Paste the installation sticker where you want to install, and drill two holes that are at a diagonal.
  • Page 68 Target Mini Fixed Rugged Dome Unscrew the three screws as indicated below. A back plate can be separated from the bottom. Figure 4-4 Use the 2 supplied screws to secure the back plate onto the ceiling or the wall where the screw anchors were inserted. Figure 4-5 Prepare an Ethernet cable with the RJ-45 connector on one end only.
  • Page 69 Remove the waterproof cap from the cable opening and thread the power and / or network cable(s) through the opening. Figure 4-6 Install the supplied waterproof rubber set onto the cable(s). The rubber set has two parts. According to the below situation, replace Part 1 if necessary.
  • Page 70 Target Mini Fixed Rugged Dome Slide the waterproof rubber set, and the waterproof cap you previously removed through the cable(s) as shown below. Figure 4-8 Connect the supplied RJ-45 connector to the Ethernet cable. If you are using a power adapter, insert the striped wire to the left pin (+) and the other wire to the right pin (-).
  • Page 71 Cap the cable opening with the waterproof cap. Use the supplied concave hexagon wrench to tighten. Figure 4-11 Thread the cable(s) under the black cable holder. You can loosen the screw on the cable holder if needed. Figure 4-12 10. Connect the camera to network and power. For details, see 4.5 Connecting the Camera.
  • Page 72 GV-IPCam Firmware Manual. 13. Adjust image clarity using the GV-IP Device Utility program. For details, see 2.2 Adjusting Image Clarity, GV-IPCam Firmware Manual. 14. Loosen the tile screw and pan screw, adjust the angles based on the live view as needed, and tighten the screws again.
  • Page 73 IMPORTANT: The gel bag loses its effectiveness when the dry camera is opened. To prevent the lens from fogging up, replace the silica gel bag every time you open the camera and conceal the silica gel bag within 2 minutes of exposing to open air. Make sure the housing cover is properly secured to prevent water from entering and damaging the inner housing.

  • Page 74: Connecting The Camera

    The power and status LEDs shall turn on (green). Use a standard network cable to connect the camera to your network. You are ready to access the live view, adjust the image clarity and configure the basics. See Getting Started, Chapter 2, GV-IPCam Firmware Manual.

  • Page 75: Loading Factory Default

    4.6 Loading Factory Default Keep the power and network cables (or PoE) connected to the camera. Press and hold the default button for about 8 seconds. Figure 4-16 Release the default button when the status LED blinks. Figure 4-17 When the status LED fades, the process of loading default settings is completed and the camera reboots automatically.

  • Page 76: Chapter 5 Cube Camera

    Cube Camera Chapter 5 Cube Camera The Cube Camera is a light weighted network camera designed for indoor usage. Its simple design allows for fast and easy installation and fixed-spot surveillance once installed. Four models are available: Model No. Specification Description 1.3 MP, H.264, Cube Fixed Iris, f: 3.35...

  • Page 77: Packing List

    5.1 Packing List • • Cube Camera Supporting Rack • • Screw x 3 Screw Anchor x 3 • • GV-IPCAM H.264 Software Power Adapter • • GV-Software DVD Warranty Card Note: The power adapter can be excluded upon request.

  • Page 78: Features

    Cube Camera 5.2 Features • 1/2.5’’ progressive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CB120 30 fps at 1280 x 1024 GV-CB220 30 fps at 1920 x 1080 • Day and night function (electronic) •...

  • Page 79: Overview

    5.3 Overview Figure 5-1 Name Description Microphone Receives sounds. Speaker Plays sounds. Connects to a 10/100 Ethernet. Turns red when the system powers on. Status LED Turns orange when the system is ready. Turns green when the camera is connected LAN LED to the Internet through wires.

  • Page 80: Installation

    Cube Camera 5.4 Installation Follow the steps below to install, connect to and adjust your Cube Camera and Wireless Cube Camera. 1. Put the supporting rack on the desired location and make marks for screw anchors. Figure 5-2 2. Drill the marks and insert the screw anchors. 3.
  • Page 81 5. Connect the network and power cables to the camera. See 5.5 Connecting the Camera. 6. Access the live view. See 2.1 Accessing the Live View, GV-IPCam Firmware Manual. 7. Adjust the angle of the camera based on live view and fasten the indicated screw.

  • Page 82: Connecting The Camera

    2. Power on using the power adapter. 3. The status LED of the camera will be orange. IMPORTANT: Be sure to use the GeoVision power adapter to power up the camera. To use your own power cable, make sure you look up the...

  • Page 83: Loading Factory Default

    5.6 Loading Factory Default 1. Keep the power and network cables connected to the camera. 2. Use a pin to press and hold the default button on the panel. Default button Status LED Figure 5-6 3. Release the default button when the status LED blinks. This shall take about 8 seconds.

  • Page 84: Chapter 6 Advanced Cube Camera

    Advanced Cube Camera Chapter 6 Advanced Cube Camera The Advanced Cube Camera integrates the passive infrared (PIR) sensor and the alarm LED to illuminate the scene automatically when the motion is detected. It also offers wireless connection to the network for flexible installation.

  • Page 85: Packing List

    6.1 Packing List • Advanced Cube Camera • Supporting Rack • Screw x 3 • Screw Anchor x 3 • GV-IPCAM H.264 Software • Power Adapter • GV-Software DVD • Warranty Card Note: The power adapter can be excluded upon request.

  • Page 86: Features

    Advanced Cube Camera 6.2 Features • 1/2.5’’ progressive scan CMOS • Dual streams from H.264 or MJPEG • Frame rate Camera Model Frame Rate GV-CA120 / CAW120 30 fps at 1280 x 1024 GV-CA220 / CAW220 30 fps at 1920 x 1080 •...

  • Page 87: Overview

    When the PIR sensor detects the movement, the white illumination LED White Illumination lights up in a low light scene. To set up the LED, see 4.1.1 Video Settings, GV-IPCam Firmware Manual. Reflects monitoring status of the camera. Monitoring LED See the below table.
  • Page 88 Advanced Cube Camera Name Description Stand screw Connects to the Supporting Rack. Power port Connects to the power adapter. Reflects system status of the camera. See Ready LED the below table. Reflects LAN status of the camera. See the LAN LED below table.

  • Page 89: Installation

    6.4 Installation Follow the steps below to install, connect to and adjust your Advanced Cube Camera and Wireless Advanced Cube Camera. 1. Put the supporting rack on the desired location and make marks for screw anchors. Figure 6-2 2. Drill the marks and insert the screw anchors. 3.
  • Page 90 5. Connect the network and power cables to the camera. See 6.5 Connecting the Camera. 6. Access the live view. See 2.1 Accessing the Live View, GV-IPCam Firmware Manual. 7. Adjust the angle of the camera based on live view and fasten the indicated screw.
  • Page 91 6.5 Connecting the Camera Figure 6-5 1. Use a standard network cable to connect the camera to your network. 2. Connect power using one of the following methods: • plugging the power adapter to the power port. • using the Power over Ethernet (PoE) function and the power will be provided over the network cable.
  • Page 92 Advanced Cube Camera 6.6 Loading Factory Default 1. Keep the power and network cables connected to the camera. 2. Use a pin to press and hold the default button on the panel. Default button Status LED Figure 6-6 3. Release the default button when the status LED blinks. This shall take about 8 seconds.

This manual is also suitable for:

Gv-mfd130Gv-mfd120Gv-mfd320Gv-mfd1501 seriesGv-mfd2401 seriesGv-mfd2501 series ... Show all

Table of Contents