GeoVision GV-IPCAM User Manual page 145

Starting and Stopping a Preset Point
To start a Preset movement, click the Option button (No. 6, Figure 8-15),
select Preset Go , and select a Preset number which has been set
previously.
Alternatively, you may use the number pad on the PTZ control panel to
enable a Preset movement:
1 Click the Show Preset button (No. 7, Figure 8-15) to open the
number pad.
2 Click the number of Preset point.
3 Click
To stop a Preset movement, click the Home button (No. 3, Figure 8-15) or
click one of the Pan / Tilt Control button (No. 2, Figure 8-15).
to start.
8
PTZ Camera
119