GeoVision GV-IPCAM User Manual page 147

5 Use the Preset drop-down list to select the Preset points for the
Sequence.
6 Use the Dwell Time drop-down list to select the staying time that the
camera stays at the Preset point. The dwell time ranges from 0 to 127
seconds at an interval of 0.5 second.
7 Use the Speed drop-down list to select the speed at which the
camera moves toward the Preset point.
8 To configure another Sequence, repeat steps 3 to 8 and select a
different Index number.
9 Click Save to complete the settings.
Starting and Stopping a Sequence
To start a Sequence, click the Option button (No. 6, Figure 8-15 select
Auto and select a Go Sequence number which you have set previously.
To stop a Sequence, click on a Pan / Tilt Control button (No. 2, Figure 8-
15) or the Home button (No. 3, Figure 8-15).
8
PTZ Camera
121