GeoVision GV-IPCAM User Manual page 322

[Disk Information]
This section shows the details of the attached storage device.
[Partition Information]
This section shows the partition details of the attached storage device.
To add a storage device:
1. Insert the storage device to the camera.
2. Click the Format button.
3. After the format is complete, the partition information will display. The
maximum space for one partition is 200 GB.
To remove a storage device:
1. Click the Remove button.
2. When you are prompted to ensure the action, click Yes. The page will
be refreshed and the partition information will be cleaned.
3. Remove the storage device from the camera.
Note:
1. If Enable Recycle is selected, the available space of the storage
device must be higher than the space you specified at the Stop
recording or recycle disk when free space of disk is smaller than
x option. Otherwise no video will be recoded.
2. The recording data may be lost if you remove the storage device
during recording.
3. If you do not remove the storage device properly, the data cannot be
read in another computer. In this case, re-plug the storage device
back to the camera. The system will repair the data automatically.
When the system is repairing the data, the Remove field will display
"Repairing".
296