GeoVision GV-IPCAM User Manual page 294

To enable connection to GV-Backup Center:
1. Activate Link: Enable the connection to the GV-Backup Center.
2. Host Name or IP Address: Type the host name or IP address of the
GV-Backup Center.
3. Port Number: Match the communication port on the GV-Backup
Center or keep the default value 30000.
4. User Name: Type a valid user name to log into the GV-Backup
Center.
5. Password: Type a valid password to log into the GV-Backup Center.
6. Backup Video: Select the streams to back up their recordings to the
GV-Backup Center.
7. Compact Video: Select the streams to only back up their Key Frames
to the GV-Backup Center, instead of full recordings. This option is
useful to save the backup time.
8. Resend all files: Select this option to send all the recorded files that
have received by the Backup Center again.
9. Enable Schedule Mode: Enable the GV-Backup Center connection
on the schedule you set in the Select Schedule Time section. Refer to
16.5 Recording Schedule for the same settings.
10. Click Apply. The Connection Status should display "Connected" and
connected time.
268