GeoVision GV-IPCAM User Manual page 218

4. Enable wireless LAN.
A. On the Web interface, select Network and LAN. This page
appears.
B. Select Wireless for Optional Network Type
C. To use a dynamic IP address assigned by the DHCP server,
select Dynamic IP address. To use a fixed IP address, select
Static IP address and type the IP address information.
5. Click Apply. The Camera will start creating a wireless connection to
the access point. For GV-CBW120/220 and GV-CAW120/220, the
LAN LED (No. 5, Figure 12-1; No.11, Figure 13-1) turns blue when
the connection is established.
6. Unplug the Ethernet cable.
192
Figure 14-6