Chapter 17 Recording And Playback; Recording - GeoVision GV-IPCAM User Manual

Chapter 17 Recording and Playback

The GV-IPCAM H.264 can record video and audio directly to the memory
card. You can play back the recorded files on the GV-System or over the
TCP/IP network.
Note: See Note for Recording at the beginning of the manual.

17.1 Recording

To enable the recording function:
1. Insert the memory card to the camera. See "To add a memory card",
16.8.3 Storage Settings.
2. If you like to set up the pre-recording, post-recording or audio
recording, see 16.1.1 Video Settings.
3. If you like to set up the schedule for video recording or I/O monitoring,
see 16.5 Recording Schedule.
4. If you like to configure the areas and sensitivity values for motion
detection, see 16.1.2 Motion Detection.
5. If you want the recording to be triggered by input device, configure the
operation of input device. See 16.2.1 Input Settings.
6. To start recording and I/O monitoring, see 16.4 Monitoring.
The camera will start recording in case of motion detection, I/O trigger, or
during the scheduled time.