6.
Connect power using one of the following methods:
•
plugging the supplied power adapter to the power port.
•
using the Power over Ethernet (PoE) function and the power will
be provided over the network cable.
7.
The status LED of the camera will be on.
8.
You are ready to access the live view, adjust the image clarity and
configure the basics. See Getting Started, Chapter 12.
Note: Make sure to connect the GV-WiFi Adapter before the camera is
powered on.
2
Box Camera
23
Need help?
Do you have a question about the GV-IPCAM and is the answer not in the manual?