GeoVision GV-IPCAM User Manual page 370

2. Click Add Camera. The dialog box appears.
3. Type the IP address, username and password of the IP camera.
Select the camera brand and device from the drop-down lists. This
dialog box appears.
4. The GV-System will automatically query for the IP camera, and the
status will be indicated as "Standby". If not, modify the HTTP port
(Figure 19-3) and streaming port (Figure 19-4) to match those of the
IP camera, and click the Query button to detect the IP camera again.
344
Figure 19-3
Figure 19-4