GeoVision GV-IPCAM User Manual page 295

If you have a failover GV-Backup Center server which provides
uninterrupted backup services in case the first GV-Backup Center failed,
configure the failover GV-Backup Center as below.
1. Automatic Failover Support: Enable the automatic connection to the
failover GV-Backup Center once the connection between camera and
the first GV-Backup Center is interrupted.
2. Host Name or IP Address: Type the host name or IP address of the
failover GV-Backup Center.
3. Port Number: Match the communication port on the failover GV-
Backup Center or keep the default value 30000.
4. User Name: Type a valid user name to log into the failover GV-
Backup Center.
5. Password: Type a valid password to log into the failover GV-Backup
Center.
6. Click Apply.
Administrator Mode
16
269