Restoring To Factory Default Settings - GeoVision GV-IPCAM User Manual

18.3 Restoring to Factory Default Settings

Please refer to the corresponding section of your camera type and follow
the steps to restore factory default settings.
Box Camera
1. Keep the power and network cables connected to the camera.
2. Use a pin to press and hold the default button on the back panel of
the camera.
Figure 18-7
3. Release the default button when the status LED blinks. This shall
take about 8 seconds.
Figure 18-8
4. When the status LED fades, the process of loading default settings is
completed and the camera reboots automatically.
Advanced Applications
18
Default button
Status LED
317