Speaker - GeoVision GV-IPCAM User Manual

Hide thumbs Also See for GV-IPCAM:

Table of Contents

16.3.9 Speaker

Note this function is only available for Advanced Cube Camera. The

Advanced Cube camera is equipped with an alarm. With the Speaker

settings, your camera can sound the speaker (No. 1, Figure 11-1) when it

is being tampered or when motions are detected. This function is disabled

Select Enable.

Type the duration time in the Alerts Interval time field. The default

value is 5 (minutes). When a motion is detected, the alarm will be on

for the specified amount of time.

Select Tampering Alarm and/or Motion Detection under Alarm

To sound the alarm upon motion events, make sure you have enabled

motion detection. For details, see 16.1.2 Motion Detection.

Figure 16-21

Do you have a question about the GV-IPCAM and is the answer not in the manual?