Storage Settings - GeoVision GV-IPCAM User Manual

Administrator Mode
16

16.8.3 Storage Settings

Based on Linux file system, the GV-IPCAM H.264 supports memory cards
for video and audio recordings. You need to format the storage device by
using the following Storage Settings. After being formatted, the storage
device will be ready to use by Linux OS of the camera.
Figure 16-35
[Storage Settings]
If Enable recycling is selected, when the space of the storage device is
lower than the specified space, the system will overwrite the oldest
recorded files.
If Enable recycling is not selected, the system will stop recording when
the specified space is reached.
[Keep days (1-255)] Specify the number of days to keep the files from 1
day to 255 days. When both Keep days and Enable recycling are
selected, the system applies whichever condition comes first. For example,
if the specified smallest amount of storage space comes earlier than the
designated keep days, then recycle is applied first.
[Enable debug message to the storage] Select this option to store debug
messages (log information) to an inserted storage device.
295