GeoVision GV-IPCAM User Manual page 169

Rotational Adjustment
10. Adjust image clarity using the GV-IP Device Utility program. For
details, see 14.2 Adjusting Image Clarity.
11. Screw on the thread lock as shown in step 1.
12. Replace the silica gel bag on the camera body within 2 minutes of
opening the silica gel bag package.
13. Secure the housing cover to the camera body as shown in step 1.
Note: Adjust the black mask inside the housing cover to make sure the
camera view is not obscured.
IMPORTANT:
1. The gel bag loses its effectiveness when the dry camera is
opened. To prevent the lens from fogging up, replace the silica gel
bag every time you open the camera and conceal the silica gel bag
within 2 minutes of exposing to open air.
2. For each newly replaced silica gel bag, allow it to absorb moisture
for at least 5 hours before operating the camera.
3. Make sure the housing cover is properly secured to prevent water
from entering and damaging the inner housing.
10
Figure 10-7
Vandal Proof IP Dome
143