Chapter 14 Getting Started; Accessing The Live View - GeoVision GV-IPCAM User Manual

Chapter 14 Getting Started

This section provides the initial and basic configurations of the GV-IPCAM
H.264.

14.1 Accessing the Live View

Access or configure your camera according to the camera type and its
firmware version:
Camera Type &
Firmware Version
•
GV-IPCAM H.264 with
firmware V1.07 or later
(except GV-PT110D,
GV-PTZ010D)
Default Connection Type
DHCP
An unused IP address is automatically
assigned by the DHCP server to the
camera when the camera is connected to
the network. Refer to 14.1.1 Checking
the Dynamic IP Address to look up the
IP address.
However, if the camera is installed in a
LAN without DHCP server, access the
camera by its default IP address
192.168.0.10 and see 14.1.2
Configuring the IP Address for more
detail.