Tampering Alarm - GeoVision GV-IPCAM User Manual

16.1.5 Tampering Alarm

Note this function is not available for PTZ Camera and PT Camera.
The Tampering Alarm is used to detect whether a camera is being
physically tampered. An alarm can be generated when the camera is
moved, covered up, or out of focus. The alarm approaches include the
triggered output device and e-mail alert. To have the tampering alarm, first
set up these alarm approaches properly:
•
To trigger the output device when a tampering event occurs, enable
the output setting and select Tampering Alarm. See 16.2.2 Output
Settings.
•
To trigger the e-mail alert when a tampering event occurs, enable the
e-mail setting and select Tampering Alarm. See 16.3.1 E-Mail.
248
Figure 16-7