Rtsp - GeoVision GV-IPCAM User Manual

16.3.8 RTSP

The RTSP enables video and audio streaming to your 3G-enabled mobile
phone. The RTSP streaming is enabled by default.
Activate Link: Enable the RTSP service.
RTSP/TCP Port: Keep the default value 8554, or modify it if
necessary.
RTP/UDP Port: Keep the default range from 17300 to 17319, or
modify it if necessary. The number of ports for use is limited to 20.
Max Connection: Set the maximum number of RTSP and 3GPP
connections to the GV-IPCAM H.264. The maximum value is 10.
Enable Audio: Turns audio streaming on or off. For the supported
firmware versions, see Appendix D.
Disable Authentication: By default, when accessing live view
through RTSP command, the ID and password of the camera are
required. Select this option to disable the authentication prompt. For
the supported firmware versions, see Appendix D.
For details on remote monitoring with mobile phones, see Mobile Phone
Connection, Chapter 21.
For RTSP command, see Appendix E.
Figure 16-20
Administrator Mode
16
273