GeoVision GV-IPCAM User Manual page 215

IMPORTANT:
1. If Dynamic IP Address or PPPoE is enabled, you need to know
which IP address the camera will get from DHCP server or ISP to
log in. If your camera is installed in the LAN, use the GV-IP Device
Utility to look up its current dynamic IP address. See 14.1.1
Checking the Dynamic IP Address. If your camera uses a public
dynamic IP address via PPPoE, use the dynamic DNS Service to
obtain a domain name that is linked to the camera's changing IP
address first. For details on Dynamic IP Address and PPPoE, see
16.7.1 LAN Configuration and 16.7.3 Advanced TCP/IP.
2. If Dynamic IP Address or PPPoE is enabled and you cannot
access the camera, you may have to reset it to the factory default
and then perform the network settings again.
To restore the factory settings, see 18.3 Restoring to Factory
Default Settings.
Getting Started
14
189