GeoVision GV-IPCAM User Manual page 328

[Host Settings] Enter a descriptive name for the camera.
[Auto Reboot Setup] Select Enable to activate automatic reboot and
specify the time for reboot in the sub fields.
Day Interval: Type the day interval between each reboot.
Reboot Time: Use the drop-down lists to specify the time for
automatic reboot.
[Repair Record Database] Click Apply to repair the database when errors
occur while playing back the recordings with the Remote ViewLog player.
Problems can occur when there are errors in firmware or damages to the
SD card.
[Database Status] Displays the repairing status of database.
[Firmware Update] This field displays the firmware version of the camera.
[System Settings]
Load Default: Clicking the Load Default button to restore factory
default settings. After applying the default settings configure the
camera's network setting again.
[Temperature Status]
Note this function is not available for Cube Camera and Advanced Cube
Camera. Displays the current chipset temperature inside the camera.
[Reboot] Clicking the Reboot button will make the camera perform
software reset.
302